PDS ZM Extrusion

, REF. B7696ANODA
Profil led Lipod - Kluś Design
Accessories:
Profil led Lesto KluśZM-PION Connector, REF.42718
Profil led Lesto KluśZM-90 Connector, REF.42716
Profil led Lesto KluśGP surface spring, REF.00293
Profil led Lesto KluśPDS ZM End Cap, REF.24145
Profil led Lesto KluśZM-180 Connector, REF.42717
Profil led Lesto KluśLIGER Cover frosted matte, LINE OF LIGHT, REF.17031
Profil led Lesto KluśKA-BIS Cover clear, REF.17072
Profil led Lesto KluśHS Cover frosted CERTIFIED, REF.1369
Profil led Lesto KluśHS Cover Clear CERTIFIED, REF.1370
Profil led Lesto KluśKA-BIS Cover frosted, REF.17071
album_psd_zm1.png1album_psd_zm33.png2album_psd_zm34.png3album_psd_zm222.png4pds_zm_album-1.jpg5

SMOOTH SIDE SURFACES

 

LINE OF LIGHT

description

Length: 39.4" (1m), 78.75" (2m), 118.11" (3m)

 

The side surfaces of the extrusion are smooth, without heat sinks. There is a ‘small lock’ on top of the extrusion which enables you to connect extrusions into extended polygonal lighting fixtures.

 

Features:

PDS ZM extrusion is made of high quality aluminum. The extrusion can accomodate LED strip up to 12mm wide.  A single line of light can be obtained with the use of densely spaced LEDs and a frosted HS (min. 140 LED/m) or LIGER (min. 120LED/m) cover. It is possible to build a sealed LED fixture with ingress protection rate of IP67.

 

Mounting:

ZM connectors, embedded in the edge of the extrusion, enable you to connect individual parts. The suspension of the fixture is performed using fasteners that match a small lock. You can also apply GP mounting springs.

 

 

technical drawing