TESE KPL Mounting Track

, REF. 18021
Profil led Lipod - Kluś Design
Accessories:
Profil led Lesto KluśTESE End Cap, REF.24047V1
Profil led Lesto KluśTESE End Cap, REF.24047
Profil led Lesto KluśSEKOMA Extrusion, REF.B6595ANODA
Sekoma_Tese.gif1Tese-album2-3.jpg2tese_web2-1.jpg3tese_endcap-1.jpg4

Mounting Track

description

"SZER" extrusions are designed to build LED fixtures of significant light output.

 

The extrusion comes with BLOK springs, which allow you to connect TESPO KPL and SEPOD extrusions.

 

The width of these  extrusions allows a maximum of 4 LED strips of 10.8mm each. The extrusion is available with a dedicated frosted SZER cover which has very good light diffusing properties. Due to the cover and properly designed height of the extrusion you can obtain a line of light.

 

A characteristic feature of SZER extrusions is their big, aesthetically designed radiators which have effective heat dissipation properties.

 

TESE KPL. – mounting track designed for making accurate slots (grooves) in the surfaces of walls and drywall ceilings and embedding fixtures based on the SEKOMA extrusion. This track is mounted to the structure of walls and drywall ceilings.


TESE KPL. mounting track is fixed with the SEKOMA extrusion by being snapped together, using a suitable lock and BLOK springs (included).

 

 

NOTE! 
-  After snapping the fixture into the mounting track, the installer should mark the direction of unclicking, without disturbing the aesthetics of the fixture.

 

- TESE KPL. mounting track fixed to a wall, ceiling, etc. must maintain a straight line and cross-sectional shape. Excessive bending of the track, crushing, or unbending its walls will prevent proper mounting of the fixture.

 

- The extrusions are dedicated for use in places not exposed to water.

technical drawing

download (PDF)