TESPO Extrusion, REF. 18020
EASY AND FAST MOUNTING OF SEPOD FIXTURE
GROOVE FOR CABLE ROUTING
"SZER" extrusions are designed to build LED fixtures of significant light output.
TESPO mounting track comes with BLOK springs, which allows you to connect TESPO and SEPOD extrusion.
The width of such extrusions allows a maximum of 4 LED strips of 10.8mm each.
A characteristic feature of SZER extrusions are their big, aesthetically designed radiators which have effective heat dissipation properties.
TESPO KPL– mounting track for SEPOD extrusion can conceal power cables and connections. TESPO KPL. facilitates the building of suspended or surface mounted lighting fixtures. The moutning track is fixed to surface using suitable screws.
To connect SEPOD extrusion with the TESPO KPL. mounting track use a suitable system of fasteners and BLOK springs (included) that offer an easy snap connection. Due to the proper connection of both extrusion and a track the fixture is protected against ‘self-decoupling’, but at the same time preserves the ability to be disassembled, e.g. for maintenance.
Use BLOK springs in the mounting extrusions in pairs every 70 to 100cm.
End caps for the TESPO KPL. mounting track are only available in a metallized, light-tight finish which resembles the color and surface of aluminum.