OPAC-30 EXTRUSION

, REF. B6164
Profil led Lipod - Kluś Design
Accessories:
Profil led Lesto KluśG-K Frosted Cover, REF.17007
Profil led Lesto KluśKMA spring for grooves, REF.00838
Profil led Lesto KluśZM-180 Connector, REF.42717
Profil led Lesto KluśZM-PION Connector, REF.42718
Profil led Lesto KluśLIGER 22 frosted cover, REF.17032
Profil led Lesto KluśKOMPENSA-K End Cap, REF.24020
Profil led Lesto KluśKOMPENSA-L End Cap, REF.24015
Profil led Lesto KluśHS 22 Frosted Cover CERTIFIED, REF.17011
Profil led Lesto KluśHS 22 Clear Cover CERTIFIED, REF.17022
Profil led Lesto KluśG-L Cover frosted, REF.00413
Profil led Lesto KluśG-K Cover translucent, REF.00415
Profil led Lesto KluśOPAC-30 End Cap, REF.24045
opac30_1.jpg1opac30_2.jpg2

ALLOWS MOUNTING IN THE GROOVES
OF IMPRECISE EDGES
AND SURFACES OF SMALL THICKNESS

description

OPAC-30 extrusion is used to build flat fixtures with large shielding collars.

Designed for mounting in slots made in dry-wall, flush with its surface and not exceeding their thickness. The smallest depth of the mounting slots for OPAC-30 is 9 mm. In dry-wall ceilings, the extrusion can be mounted using KMA mounting springs.

The extrusion can fit two 10mm-wide LED strips or one LED strip with a width of more than 10 mm but not greater than 21 mm.

 

Matching accessories:

 - standard covers: HS22 frosted or transparent, MUN 22 transparent matte.

 - optional covers: G-L and G-K series with matching KOMPENSA end caps

 - OPAC-30 end caps – colored: light grey or metallic.

technical drawing