KOZEL EXTRUSION

, REF. B6454
Profil led Lipod - Kluś Design
Accessories:
Profil led Lesto KluśZM-NA-90 Connector for non-anodized extrusions, REF.42723
Profil led Lesto KluśZM-NA-180 Connector for non-anodized extrusions, REF.42724
Profil led Lesto KluśLIGER 22 frosted cover, REF.17032
Profil led Lesto KluśHS 22 Clear Cover CERTIFIED, REF.17022
Profil led Lesto KluśHS 22 Frosted Cover CERTIFIED, REF.17011
Profil led Lesto KluśKOZEL End Cap, REF.24034
kozel_album_roz-1-1.jpg1kozel_album_animka.gif2warstwy_kozel_huwawei.jpg3

LINE OF LIGHT WITH NO ALUMINUM ELEMENTS OF THE EXTRUSION SHOWING

description

KOZEL extrusion is designed for mounting in drywall. It makes a LED fixture that creates a line of light in wall and ceiling surfaces with no aluminum parts showing.

Mounting instructions


KOZEL extrusion can be fixed in slots made in previously fitted drywall using gypsum adhesive (GS 20  CECOL) or mounting adhesive. Before you fix the profile in drywall, you should take care to lead the power cables out. They can be led in the profile by cutting a hole in the aluminum or end cap. After the glue dries, cover aluminum collars thinly with a suitable adhesive, put the drywall mesh on, fill all and when dry, polish it in such a way that it does not affect the base edge of the profile. Finally, apply paint over the base edge of the extrusion.

 

Make sure to cover the profile while performing the above work. When you have finished, remove the working cover, mount the LEDs, solder the power wires, and finally, put on a clean cover.

 

ATTENTION: The KOZEL extrusion is not compatible with mounting springs (KMA groove springs).

technical drawing